Industrial Automation Technician Diploma

nine-month diploma (post Electronics Technician Core certificate)

Where: Campbell River
Starts: September
  • Learn to work on all types of electronic systems, including motor controls and progammable logic controllers, data acquisition, computer control systems and robotics.
  • Working with state-of-the-art equipment and technology, you’ll graduate with a combined total of 1,400 hours of practical training, including interactive field trips.

Career possibilities: Graduates qualify to work within industries such as renewable energy, oil and gas, mining, manufacturing, pharmaceuticals, forest products, food and beverage and more. NIC's Industrial Automation Technician diploma program has been accredited by the Canadian Forces and graduates can gain advanced standing as a naval electronics technician.

close button

Share this gallery:


  • National accreditation. NIC's Industrial Automation Technician program works with the Applied Science Technologists and Technicians of British Columbia (ASTTBC) to receive accreditation through the Canadian Technology Accreditation Board (CTAB) and/ or Technology Accreditations Canada (TAC), which verifies that the program has a proper balance of academic and theoretical portions, suitably reinforced by laboratory and practical experience amounting to approximately one half of the total program.
  • Exclusive networks. You’ll be eligible to become a student member of Applied Science Technologists & Technicians of British Columbia (ASTTBC), with access to the Canadian Technical Employment Network (CTEN) for job hunting.
  • Considering a career in the Canadian Forces? NIC’s Industrial Automation Technician program has been accredited by the Canadian Forces, and graduates can gain advanced standing as a naval electronics technician.
  • A great place to be. Small class size, state-of-the-art equipment, low cost of living, and a great climate all combine to give you the best possible learning environment.


As an industrial automation technician you will design, install, and maintain electronics equipment used in modern industrial processes. You will work on a wide range of systems, from the simplest fuses and motors to sophisticated electronic computer interface boards, motor drives, programmable logic controllers, solid-state devices and robotics.
You will take three courses in instrumentation and process control, two courses in programmable logic controllers, two courses in electrical power and power electronics and one course in each of AutoCAD, industrial control of chemical processes, fluid power and data acquisition. Each course uses state-of-the-art technology and equipment, including industrial robots. An intensive hands-on lab program is supplemented with industry-relevant field trips.
You will be introduced to the types of specialty equipment typically used in the industrial automation industry. These include instrumentation and process control systems, programmable logic controllers (PLCs) of all types, variable frequency drives or inverter drives, human machine interfaces (HMIs), fluid systems including hydraulic and pneumatic positioners and drives, robotics and controls and microprocessor-operated equipment of many different types. Computers are used to interface with all of these systems and equipment.
You will accumulate 700 hours of hands-on lab time in the first year core program and 700 hours during the second year of the program, for a total of 1,400 hours of practical training upon completion. In some provinces, this time credit can be applied toward your apprenticeship.
If you hold a Red Seal in an electrical trade, you may be eligible to enter this program through an alternative route. This involves an assessment of your prior learning from your apprenticeship and recommendations for any studies needed. Contact the instructor for further information.
NIC’s Industrial Automation Technician program has been accredited by the Canadian Forces and graduates can gain advanced standing as a naval electronics technician. For more information, visit Paid Education.

Career Opportunities

As an Industrial Automation Technician graduate, you will discover career opportunities in high demand fields such as engineering design, maintenance, industrial control, supervisory control and data acquisition, industrial networking and technical sales. Or, transition into an instrumentation or electrical apprenticeship with advanced standing. 

Graduates typically obtain well-paying careers in industries including renewable energy, transportation, forest products, pulp and paper, chemical processing, oil/gas/petroleum, mining and metal processing, steam generation and utilities, water and waste water treatment, food and beverage manufacturing, pharmaceuticals, textiles, materials handling and electronics/semiconductors manufacturing. Due to the increasing use of electronics in all of these fields, opportunities will continue to grow.

Supply List

You are required to obtain the following basic supplies and tools:

  • three-ring binder
  • pen, pencil, highlighter
  • lined paper and graph paper
  • ruler
  • scientific calculator 

The following is recommended:

  • A tablet or laptop capable of displaying PDF files

Admission Requirements

  1. Successful completion of the Electronics Core Technician program or the "core" electronics course requirements at any college or institute that is a member of the International Electronics Technician Articulation Committee.
  2. Submit the following:
    a) post-Secondary educational transcripts or related training documentation and, if applicable
    b) documentation of workplace hours in related discipline, and
    c) interview with instructor, after review of above documents.

Upgrade with us to meet prerequisites

Upgrade your English, math and science courses for entry into the program of your choice. Succeed with the help of NIC’s supportive instructors. Courses are flexible and start several times a year so you can learn at your own pace. We offer daytime and evening options. Learn more

International Language Requirements

For international language requirements click here.

To Be Successful

  • Teamwork, an aptitude for mathematics and good communication and analytic skills are basic to success.
  • Enthusiasm, coupled with adaptability, flexibility and good computer skills are also a necessity.

Program Requirements

  • ELC-201 Process Measurement
  • ELC-205 Process Control Devices
  • ELC-206 Process Control Systems
  • ELC-215 Programmable Logic Controllers I
  • ELC-216 Programmable Logic Controllers II
  • ELC-220 AutoCAD for Technicians
  • ELC-230 Industrial Power Electronics
  • ELC-235 Electrical Power Circuits and Machines
  • ELC-240 Industrial Control of Chemical Processes
  • ELC-250 Fluid Power Controls
  • ELC-260 Data Acquisition and Control Systems
  • ELC-270 Control System Project

Completion Requirements

To pass the program you are required to attain a minimum of 70% in each course.


Tuition & Costs Estimate for
Fall 2018, Winter, Spring & Summer 2019

Costs indicated are estimates for a 100% course load per year, unless otherwise noted. Additional fees may also include necessary equipment, supplies, NIC appointed uniforms, or field trips not included in these estimates.

While we do our best to share accurate and timely fee information, changes may occur. For more information, visit tuition page.

Domestic Fees

Year 1
Tuition $2,910
NISU Fees $135
Lab Fees $90
Books $1,430
Learner Resource $155
Health and Dental $275
Total $4,995

International Fees

Year 1
Tuition $13,625
NISU Fees $135
Lab Fees $90
Books $1,430
Learner Resource $155
Health and Dental $275
Total $15,710
Additional Costs for International Students include the $100 Application fee (required) and the $250 Accommodation Application Fee (optional).

Brad Harsell

Brad Harsell
Campbell River Campus 250-923-9732 | Location DWG - 217